Skip to content

openssl-s_server

NAME

openssl-s_server - SSL/TLS server program

SYNOPSIS

openssl s_server [-help] [-port +int] [-accept val] [-unix val] [-4] [-6] [-unlink] [-context val] [-verify int] [-Verify int] [-cert infile] [-cert2 infile] [-certform DER|PEM|P12] [-cert_chain infile] [-build_chain] [-serverinfo val] [-key filename|uri] [-key2 filename|uri] [-keyform DER|PEM|P12|ENGINE] [-pass val] [-dcert infile] [-dcertform DER|PEM|P12] [-dcert_chain infile] [-dkey filename|uri] [-dkeyform DER|PEM|P12|ENGINE] [-dpass val] [-nbio_test] [-crlf] [-debug] [-msg] [-msgfile outfile] [-state] [-nocert] [-quiet] [-no_resume_ephemeral] [-www] [-WWW] [-http_server_binmode] [-no_ca_names] [-ignore_unexpected_eof] [-servername] [-servername_fatal] [-tlsextdebug] [-HTTP] [-id_prefix val] [-keymatexport val] [-keymatexportlen +int] [-CRL infile] [-CRLform DER|PEM] [-crl_download] [-chainCAfile infile] [-chainCApath dir] [-chainCAstore uri] [-verifyCAfile infile] [-verifyCApath dir] [-verifyCAstore uri] [-no_cache] [-ext_cache] [-verify_return_error] [-verify_quiet] [-ign_eof] [-no_ign_eof] [-no_etm] [-no_ems] [-status] [-status_verbose] [-status_timeout int] [-proxy [http[s]://][userinfo@]host[:port][/path][?query][#fragment]] [-no_proxy addresses] [-status_url val] [-status_file infile] [-ssl_config val] [-trace] [-security_debug] [-security_debug_verbose] [-brief] [-rev] [-async] [-max_send_frag +int] [-split_send_frag +int] [-max_pipelines +int] [-naccept +int] [-read_buf +int] [-bugs] [-no_tx_cert_comp] [-no_rx_cert_comp] [-no_comp] [-comp] [-no_ticket] [-serverpref] [-legacy_renegotiation] [-no_renegotiation] [-no_resumption_on_reneg] [-allow_no_dhe_kex] [-prefer_no_dhe_kex] [-prioritize_chacha] [-strict] [-sigalgs val] [-client_sigalgs val] [-groups val] [-curves val] [-named_curve val] [-cipher val] [-ciphersuites val] [-dhparam infile] [-record_padding val] [-debug_broken_protocol] [-nbio] [-psk_identity val] [-psk_hint val] [-psk val] [-psk_session file] [-srpvfile infile] [-srpuserseed val] [-timeout] [-mtu +int] [-listen] [-sctp] [-sctp_label_bug] [-use_srtp val] [-no_dhe] [-nextprotoneg val] [-alpn val] [-ktls] [-sendfile] [-zerocopy_sendfile] [-keylogfile outfile] [-recv_max_early_data int] [-max_early_data int] [-early_data] [-stateless] [-anti_replay] [-no_anti_replay] [-num_tickets] [-tfo] [-cert_comp] [-nameopt option] [-no_ssl3] [-no_tls1] [-no_tls1_1] [-no_tls1_2] [-no_tls1_3] [-ssl3] [-tls1] [-tls1_1] [-tls1_2] [-tls1_3] [-dtls] [-dtls1] [-dtls1_2] [-allow_proxy_certs] [-attime timestamp] [-no_check_time] [-check_ss_sig] [-crl_check] [-crl_check_all] [-explicit_policy] [-extended_crl] [-ignore_critical] [-inhibit_any] [-inhibit_map] [-partial_chain] [-policy arg] [-policy_check] [-policy_print] [-purpose purpose] [-suiteB_128] [-suiteB_128_only] [-suiteB_192] [-trusted_first] [-no_alt_chains] [-use_deltas] [-auth_level num] [-verify_depth num] [-verify_email email] [-verify_hostname hostname] [-verify_ip ip] [-verify_name name] [-x509_strict] [-issuer_checks] [-bugs] [-no_comp] [-comp] [-no_ticket] [-serverpref] [-client_renegotiation] [-legacy_renegotiation] [-no_renegotiation] [-no_resumption_on_reneg] [-legacy_server_connect] [-no_legacy_server_connect] [-no_etm] [-allow_no_dhe_kex] [-prefer_no_dhe_kex] [-prioritize_chacha] [-strict] [-sigalgs algs] [-client_sigalgs algs] [-groups groups] [-curves curves] [-named_curve curve] [-cipher ciphers] [-ciphersuites 1.3ciphers] [-min_protocol minprot] [-max_protocol maxprot] [-record_padding padding] [-debug_broken_protocol] [-no_middlebox] [-xkey infile] [-xcert file] [-xchain file] [-xchain_build file] [-xcertform DER|PEM]> [-xkeyform DER|PEM]> [-CAfile file] [-no-CAfile] [-CApath dir] [-no-CApath] [-CAstore uri] [-no-CAstore] [-rand files] [-writerand file] [-engine id] [-provider name] [-provider-path path] [-propquery propq] [-enable_server_rpk] [-enable_client_rpk]

DESCRIPTION

This command implements a generic SSL/TLS server which listens for connections on a given port using SSL/TLS.

OPTIONS

In addition to the options below, this command also supports the common and server only options documented "Supported Command Line Commands" in SSL_CONF_cmd(3)

  • -help

    Print out a usage message.

  • -port +int

    The TCP port to listen on for connections. If not specified 4433 is used.

  • -accept val

    The optional TCP host and port to listen on for connections. If not specified, *:4433 is used.

  • -unix val

    Unix domain socket to accept on.

  • -4

    Use IPv4 only.

  • -6

    Use IPv6 only.

  • -unlink

    For -unix, unlink any existing socket first.

  • -context val

    Sets the SSL context id. It can be given any string value. If this option is not present a default value will be used.

  • -verify int, -Verify int

    The verify depth to use. This specifies the maximum length of the client certificate chain and makes the server request a certificate from the client. With the -verify option a certificate is requested but the client does not have to send one, with the -Verify option the client must supply a certificate or an error occurs.

    If the cipher suite cannot request a client certificate (for example an anonymous cipher suite or PSK) this option has no effect.

  • -cert infile

    The certificate to use, most servers cipher suites require the use of a certificate and some require a certificate with a certain public key type: for example the DSS cipher suites require a certificate containing a DSS (DSA) key. If not specified then the filename server.pem will be used.

  • -cert2 infile

    The certificate file to use for servername; default is server2.pem.

  • -certform DER|PEM|P12

    The server certificate file format; unspecified by default. See openssl-format-options(1) for details.

  • -cert_chain

    A file or URI of untrusted certificates to use when attempting to build the certificate chain related to the certificate specified via the -cert option. These untrusted certificates are sent to clients and used for generating certificate status (aka OCSP stapling) requests. The input can be in PEM, DER, or PKCS#12 format.

  • -build_chain

    Specify whether the application should build the server certificate chain to be provided to the client.

  • -serverinfo val

    A file containing one or more blocks of PEM data. Each PEM block must encode a TLS ServerHello extension (2 bytes type, 2 bytes length, followed by "length" bytes of extension data). If the client sends an empty TLS ClientHello extension matching the type, the corresponding ServerHello extension will be returned.

  • -key filename|uri

    The private key to use. If not specified then the certificate file will be used.

  • -key2 filename|uri

    The private Key file to use for servername if not given via -cert2.

  • -keyform DER|PEM|P12|ENGINE

    The key format; unspecified by default. See openssl-format-options(1) for details.

  • -pass val

    The private key and certificate file password source. For more information about the format of val, see openssl-passphrase-options(1).

  • -dcert infile, -dkey filename|uri

    Specify an additional certificate and private key, these behave in the same manner as the -cert and -key options except there is no default if they are not specified (no additional certificate and key is used). As noted above some cipher suites require a certificate containing a key of a certain type. Some cipher suites need a certificate carrying an RSA key and some a DSS (DSA) key. By using RSA and DSS certificates and keys a server can support clients which only support RSA or DSS cipher suites by using an appropriate certificate.

  • -dcert_chain

    A file or URI of untrusted certificates to use when attempting to build the server certificate chain when a certificate specified via the -dcert option is in use. The input can be in PEM, DER, or PKCS#12 format.

  • -dcertform DER|PEM|P12

    The format of the additional certificate file; unspecified by default. See openssl-format-options(1) for details.

  • -dkeyform DER|PEM|P12|ENGINE

    The format of the additional private key; unspecified by default. See openssl-format-options(1) for details.

  • -dpass val

    The passphrase for the additional private key and certificate. For more information about the format of val, see openssl-passphrase-options(1).

  • -nbio_test

    Tests non blocking I/O.

  • -crlf

    This option translated a line feed from the terminal into CR+LF.

  • -debug

    Print extensive debugging information including a hex dump of all traffic.

  • -security_debug

    Print output from SSL/TLS security framework.

  • -security_debug_verbose

    Print more output from SSL/TLS security framework

  • -msg

    Show all protocol messages with hex dump.

  • -msgfile outfile

    File to send output of -msg or -trace to, default standard output.

  • -state

    Prints the SSL session states.

  • -CRL infile

    The CRL file to use.

  • -CRLform DER|PEM

    The CRL file format; unspecified by default. See openssl-format-options(1) for details.

  • -crl_download

    Download CRLs from distribution points given in CDP extensions of certificates

  • -verifyCAfile filename

    A file in PEM format CA containing trusted certificates to use for verifying client certificates.

  • -verifyCApath dir

    A directory containing trusted certificates to use for verifying client certificates. This directory must be in "hash format", see openssl-verify(1) for more information.

  • -verifyCAstore uri

    The URI of a store containing trusted certificates to use for verifying client certificates.

  • -chainCAfile file

    A file in PEM format containing trusted certificates to use when attempting to build the server certificate chain.

  • -chainCApath dir

    A directory containing trusted certificates to use for building the server certificate chain provided to the client. This directory must be in "hash format", see openssl-verify(1) for more information.

  • -chainCAstore uri

    The URI of a store containing trusted certificates to use for building the server certificate chain provided to the client. The URI may indicate a single certificate, as well as a collection of them. With URIs in the file: scheme, this acts as -chainCAfile or -chainCApath, depending on if the URI indicates a directory or a single file. See ossl_store-file(7) for more information on the file: scheme.

  • -nocert

    If this option is set then no certificate is used. This restricts the cipher suites available to the anonymous ones (currently just anonymous DH).

  • -quiet

    Inhibit printing of session and certificate information.

  • -no_resume_ephemeral

    Disable caching and tickets if ephemeral (EC)DH is used.

  • -tlsextdebug

    Print a hex dump of any TLS extensions received from the server.

  • -www

    Sends a status message back to the client when it connects. This includes information about the ciphers used and various session parameters. The output is in HTML format so this option can be used with a web browser. The special URL /renegcert turns on client cert validation, and /reneg tells the server to request renegotiation. The -early_data option cannot be used with this option.

  • -WWW, -HTTP

    Emulates a simple web server. Pages will be resolved relative to the current directory, for example if the URL https://myhost/page.html is requested the file ./page.html will be sent. If the -HTTP flag is used, the files are sent directly, and should contain any HTTP response headers (including status response line). If the -WWW option is used, the response headers are generated by the server, and the file extension is examined to determine the Content-Type header. Extensions of html, htm, and php are text/html and all others are text/plain. In addition, the special URL /stats will return status information like the -www option. Neither of these options can be used in conjunction with -early_data.

  • -http_server_binmode

    When acting as web-server (using option -WWW or -HTTP) open files requested by the client in binary mode.

  • -no_ca_names

    Disable TLS Extension CA Names. You may want to disable it for security reasons or for compatibility with some Windows TLS implementations crashing when this extension is larger than 1024 bytes.

  • -ignore_unexpected_eof

    Some TLS implementations do not send the mandatory close_notify alert on shutdown. If the application tries to wait for the close_notify alert but the peer closes the connection without sending it, an error is generated. When this option is enabled the peer does not need to send the close_notify alert and a closed connection will be treated as if the close_notify alert was received. For more information on shutting down a connection, see SSL_shutdown(3).

  • -servername

    Servername for HostName TLS extension.

  • -servername_fatal

    On servername mismatch send fatal alert (default: warning alert).

  • -id_prefix val

    Generate SSL/TLS session IDs prefixed by val. This is mostly useful for testing any SSL/TLS code (e.g. proxies) that wish to deal with multiple servers, when each of which might be generating a unique range of session IDs (e.g. with a certain prefix).

  • -keymatexport

    Export keying material using label.

  • -keymatexportlen

    Export the given number of bytes of keying material; default 20.

  • -no_cache

    Disable session cache.

  • -ext_cache.

    Disable internal cache, set up and use external cache.

  • -verify_return_error

    Verification errors normally just print a message but allow the connection to continue, for debugging purposes. If this option is used, then verification errors close the connection.

  • -verify_quiet

    No verify output except verify errors.

  • -ign_eof

    Ignore input EOF (default: when -quiet).

  • -no_ign_eof

    Do not ignore input EOF.

  • -no_etm

    Disable Encrypt-then-MAC negotiation.

  • -no_ems

    Disable Extended master secret negotiation.

  • -status

    Enables certificate status request support (aka OCSP stapling).

  • -status_verbose

    Enables certificate status request support (aka OCSP stapling) and gives a verbose printout of the OCSP response. Use the -cert_chain option to specify the certificate of the server's certificate signer that is required for certificate status requests.

  • -status_timeout int

    Sets the timeout for OCSP response to int seconds.

  • -proxy [http[s]://][userinfo@]host[:port][/path][?query][#fragment]

    The HTTP(S) proxy server to use for reaching the OCSP server unless -no_proxy applies, see below. If the host string is an IPv6 address, it must be enclosed in [ and ]. The proxy port defaults to 80 or 443 if the scheme is https; apart from that the optional http:// or https:// prefix is ignored, as well as any userinfo, path, query, and fragment components. Defaults to the environment variable http_proxy if set, else HTTP_PROXY in case no TLS is used, otherwise https_proxy if set, else HTTPS_PROXY.

  • -no_proxy addresses

    List of IP addresses and/or DNS names of servers not to use an HTTP(S) proxy for, separated by commas and/or whitespace (where in the latter case the whole argument must be enclosed in "..."). Default is from the environment variable no_proxy if set, else NO_PROXY.

  • -status_url val

    Sets a fallback responder URL to use if no responder URL is present in the server certificate. Without this option an error is returned if the server certificate does not contain a responder address. The optional userinfo and fragment URL components are ignored. Any given query component is handled as part of the path component.

  • -status_file infile

    Overrides any OCSP responder URLs from the certificate and always provides the OCSP Response stored in the file. The file must be in DER format.

  • -ssl_config val

    Configure SSL_CTX using the given configuration value.

  • -trace

    Show verbose trace output of protocol messages.

  • -brief

    Provide a brief summary of connection parameters instead of the normal verbose output.

  • -rev

    Simple echo server that sends back received text reversed. Also sets -brief. Cannot be used in conjunction with -early_data.

  • -async

    Switch on asynchronous mode. Cryptographic operations will be performed asynchronously. This will only have an effect if an asynchronous capable engine is also used via the -engine option. For test purposes the dummy async engine (dasync) can be used (if available).

  • -max_send_frag +int

    The maximum size of data fragment to send. See SSL_CTX_set_max_send_fragment(3) for further information.

  • -split_send_frag +int

    The size used to split data for encrypt pipelines. If more data is written in one go than this value then it will be split into multiple pipelines, up to the maximum number of pipelines defined by max_pipelines. This only has an effect if a suitable cipher suite has been negotiated, an engine that supports pipelining has been loaded, and max_pipelines is greater than 1. See SSL_CTX_set_split_send_fragment(3) for further information.

  • -max_pipelines +int

    The maximum number of encrypt/decrypt pipelines to be used. This will only have an effect if an engine has been loaded that supports pipelining (e.g. the dasync engine) and a suitable cipher suite has been negotiated. The default value is 1. See SSL_CTX_set_max_pipelines(3) for further information.

  • -naccept +int

    The server will exit after receiving the specified number of connections, default unlimited.

  • -read_buf +int

    The default read buffer size to be used for connections. This will only have an effect if the buffer size is larger than the size that would otherwise be used and pipelining is in use (see SSL_CTX_set_default_read_buffer_len(3) for further information).

  • -bugs

    There are several known bugs in SSL and TLS implementations. Adding this option enables various workarounds.

  • -no_tx_cert_comp

    Disables support for sending TLSv1.3 compressed certificates.

  • -no_rx_cert_comp

    Disables support for receiving TLSv1.3 compressed certificates.

  • -no_comp

    Disable negotiation of TLS compression. TLS compression is not recommended and is off by default as of OpenSSL 1.1.0.

  • -comp

    Enables support for SSL/TLS compression. This option was introduced in OpenSSL 1.1.0. TLS compression is not recommended and is off by default as of OpenSSL 1.1.0. TLS compression can only be used in security level 1 or lower. From OpenSSL 3.2.0 and above the default security level is 2, so this option will have no effect without also changing the security level. Use the -cipher option to change the security level. See openssl-ciphers(1) for more information.

  • -no_ticket

    Disable RFC4507bis session ticket support. This option has no effect if TLSv1.3 is negotiated. See -num_tickets.

  • -num_tickets

    Control the number of tickets that will be sent to the client after a full handshake in TLSv1.3. The default number of tickets is 2. This option does not affect the number of tickets sent after a resumption handshake.

  • -serverpref

    Use the server's cipher preferences, rather than the client's preferences.

  • -prioritize_chacha

    Prioritize ChaCha ciphers when preferred by clients. Requires -serverpref.

  • -no_resumption_on_reneg

    Set the SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION option.

  • -client_sigalgs val

    Signature algorithms to support for client certificate authentication (colon-separated list).

  • -named_curve val

    Specifies the elliptic curve to use. NOTE: this is single curve, not a list.

    The list of all supported groups includes named EC parameters as well as X25519 and X448 or FFDHE groups, and may also include groups implemented in 3rd-party providers. For a list of named EC parameters, use:

    $ openssl ecparam -list_curves
    
  • -cipher val

    This allows the list of TLSv1.2 and below ciphersuites used by the server to be modified. This list is combined with any TLSv1.3 ciphersuites that have been configured. When the client sends a list of supported ciphers the first client cipher also included in the server list is used. Because the client specifies the preference order, the order of the server cipherlist is irrelevant. See openssl-ciphers(1) for more information.

  • -ciphersuites val

    This allows the list of TLSv1.3 ciphersuites used by the server to be modified. This list is combined with any TLSv1.2 and below ciphersuites that have been configured. When the client sends a list of supported ciphers the first client cipher also included in the server list is used. Because the client specifies the preference order, the order of the server cipherlist is irrelevant. See openssl-ciphers(1) command for more information. The format for this list is a simple colon (":") separated list of TLSv1.3 ciphersuite names.

  • -dhparam infile

    The DH parameter file to use. The ephemeral DH cipher suites generate keys using a set of DH parameters. If not specified then an attempt is made to load the parameters from the server certificate file. If this fails then a static set of parameters hard coded into this command will be used.

  • -nbio

    Turns on non blocking I/O.

  • -timeout

    Enable timeouts.

  • -mtu

    Set link-layer MTU.

  • -psk_identity val

    Expect the client to send PSK identity val when using a PSK cipher suite, and warn if they do not. By default, the expected PSK identity is the string "Client_identity".

  • -psk_hint val

    Use the PSK identity hint val when using a PSK cipher suite.

  • -psk val

    Use the PSK key val when using a PSK cipher suite. The key is given as a hexadecimal number without leading 0x, for example -psk 1a2b3c4d. This option must be provided in order to use a PSK cipher.

  • -psk_session file

    Use the pem encoded SSL_SESSION data stored in file as the basis of a PSK. Note that this will only work if TLSv1.3 is negotiated.

  • -srpvfile

    The verifier file for SRP. This option is deprecated.

  • -srpuserseed

    A seed string for a default user salt. This option is deprecated.

  • -listen

    This option can only be used in conjunction with one of the DTLS options above. With this option, this command will listen on a UDP port for incoming connections. Any ClientHellos that arrive will be checked to see if they have a cookie in them or not. Any without a cookie will be responded to with a HelloVerifyRequest. If a ClientHello with a cookie is received then this command will connect to that peer and complete the handshake.

  • -sctp

    Use SCTP for the transport protocol instead of UDP in DTLS. Must be used in conjunction with -dtls, -dtls1 or -dtls1_2. This option is only available where OpenSSL has support for SCTP enabled.

  • -sctp_label_bug

    Use the incorrect behaviour of older OpenSSL implementations when computing endpoint-pair shared secrets for DTLS/SCTP. This allows communication with older broken implementations but breaks interoperability with correct implementations. Must be used in conjunction with -sctp. This option is only available where OpenSSL has support for SCTP enabled.

  • -use_srtp

    Offer SRTP key management with a colon-separated profile list.

  • -no_dhe

    If this option is set then no DH parameters will be loaded effectively disabling the ephemeral DH cipher suites.

  • -alpn val, -nextprotoneg val

    These flags enable the Application-Layer Protocol Negotiation or Next Protocol Negotiation (NPN) extension, respectively. ALPN is the IETF standard and replaces NPN. The val list is a comma-separated list of supported protocol names. The list should contain the most desirable protocols first. Protocol names are printable ASCII strings, for example "http/1.1" or "spdy/3". The flag -nextprotoneg cannot be specified if -tls1_3 is used.

  • -ktls

    Enable Kernel TLS for sending and receiving. This option was introduced in OpenSSL 3.2.0. Kernel TLS is off by default as of OpenSSL 3.2.0.

  • -sendfile

    If this option is set and KTLS is enabled, SSL_sendfile() will be used instead of BIO_write() to send the HTTP response requested by a client. This option is only valid when -ktls along with -WWW or -HTTP are specified.

  • -zerocopy_sendfile

    If this option is set, SSL_sendfile() will use the zerocopy TX mode, which gives a performance boost when used with KTLS hardware offload. Note that invalid TLS records might be transmitted if the file is changed while being sent. This option depends on -sendfile; when used alone, -sendfile is implied, and a warning is shown. Note that KTLS sendfile on FreeBSD always runs in the zerocopy mode.

  • -keylogfile outfile

    Appends TLS secrets to the specified keylog file such that external programs (like Wireshark) can decrypt TLS connections.

  • -max_early_data int

    Change the default maximum early data bytes that are specified for new sessions and any incoming early data (when used in conjunction with the -early_data flag). The default value is approximately 16k. The argument must be an integer greater than or equal to 0.

  • -recv_max_early_data int

    Specify the hard limit on the maximum number of early data bytes that will be accepted.

  • -early_data

    Accept early data where possible. Cannot be used in conjunction with -www, -WWW, -HTTP or -rev.

  • -stateless

    Require TLSv1.3 cookies.

  • -anti_replay, -no_anti_replay

    Switches replay protection on or off, respectively. Replay protection is on by default unless overridden by a configuration file. When it is on, OpenSSL will automatically detect if a session ticket has been used more than once, TLSv1.3 has been negotiated, and early data is enabled on the server. A full handshake is forced if a session ticket is used a second or subsequent time. Any early data that was sent will be rejected.

  • -tfo

    Enable acceptance of TCP Fast Open (RFC7413) connections.

  • -cert_comp

    Pre-compresses certificates (RFC8879) that will be sent during the handshake.

  • -nameopt option

    This specifies how the subject or issuer names are displayed. See openssl-namedisplay-options(1) for details.

  • -no_ssl3, -no_tls1, -no_tls1_1, -no_tls1_2, -no_tls1_3, -ssl3, -tls1, -tls1_1, -tls1_2, -tls1_3

    See "TLS Version Options" in openssl(1).

  • -dtls, -dtls1, -dtls1_2

    These specify the use of DTLS instead of TLS. See "TLS Version Options" in openssl(1).

  • -bugs, -comp, -no_comp, -no_ticket, -serverpref, -client_renegotiation, -legacy_renegotiation, -no_renegotiation, -no_resumption_on_reneg, -legacy_server_connect, -no_legacy_server_connect, -no_etm-allow_no_dhe_kex, -prefer_no_dhe_kex, -prioritize_chacha, -strict, -sigalgsalgs, -client_sigalgs algs, -groups groups, -curvescurves, -named_curve curve, -cipher ciphers, -ciphersuites1.3ciphers, -min_protocol minprot, -max_protocol maxprot, -record_padding padding, -debug_broken_protocol, -no_middlebox

    See "SUPPORTED COMMAND LINE COMMANDS" in SSL_CONF_cmd(3) for details.

  • -xkey infile, -xcert file, -xchain file, -xchain_build file, -xcertform DER|PEM, -xkeyform DER|PEM

    Set extended certificate verification options. See "Extended Verification Options" in openssl-verification-options(1) for details.

  • -CAfile file, -no-CAfile, -CApath dir, -no-CApath, -CAstore uri, -no-CAstore

    See "Trusted Certificate Options" in openssl-verification-options(1) for details.

  • -rand files, -writerand file

    See "Random State Options" in openssl(1) for details.

  • -engine id

    See "Engine Options" in openssl(1). This option is deprecated.

  • -provider name

  • -provider-path path
  • -propquery propq

    See "Provider Options" in openssl(1), provider(7), and property(7).

  • -allow_proxy_certs, -attime, -no_check_time, -check_ss_sig, -crl_check, -crl_check_all, -explicit_policy, -extended_crl, -ignore_critical, -inhibit_any, -inhibit_map, -no_alt_chains, -partial_chain, -policy, -policy_check, -policy_print, -purpose, -suiteB_128, -suiteB_128_only, -suiteB_192, -trusted_first, -use_deltas, -auth_level, -verify_depth, -verify_email, -verify_hostname, -verify_ip, -verify_name, -x509_strict -issuer_checks

    Set various options of certificate chain verification. See "Verification Options" in openssl-verification-options(1) for details.

    If the server requests a client certificate, then verification errors are displayed, for debugging, but the command will proceed unless the -verify_return_error option is used.

  • -enable_server_rpk

    Enable support for sending raw public keys (RFC7250) to the client. A raw public key will be sent by the server, if solicited by the client, provided a suitable key and public certificate pair is configured. Clients that don't support raw public keys or prefer to use X.509 certificates can still elect to receive X.509 certificates as usual.

    Raw public keys are extracted from the configured certificate/private key.

  • -enable_client_rpk

    Enable support for receiving raw public keys (RFC7250) from the client. Use of X.509 certificates by the client becomes optional, and clients that support raw public keys may elect to use them. Clients that don't support raw public keys or prefer to use X.509 certificates can still elect to send X.509 certificates as usual.

    Raw public keys are extracted from the configured certificate/private key.

CONNECTED COMMANDS

If a connection request is established with an SSL client and neither the -www nor the -WWW option has been used then normally any data received from the client is displayed and any key presses will be sent to the client.

Certain commands are also recognized which perform special operations. These commands are a letter which must appear at the start of a line. They are listed below.

  • q

    End the current SSL connection but still accept new connections.

  • Q

    End the current SSL connection and exit.

  • r

    Renegotiate the SSL session (TLSv1.2 and below only).

  • R

    Renegotiate the SSL session and request a client certificate (TLSv1.2 and below only).

  • P

    Send some plain text down the underlying TCP connection: this should cause the client to disconnect due to a protocol violation.

  • S

    Print out some session cache status information.

  • k

    Send a key update message to the client (TLSv1.3 only)

  • K

    Send a key update message to the client and request one back (TLSv1.3 only)

  • c

    Send a certificate request to the client (TLSv1.3 only)

NOTES

This command can be used to debug SSL clients. To accept connections from a web browser the command:

openssl s_server -accept 443 -www

can be used for example.

Although specifying an empty list of CAs when requesting a client certificate is strictly speaking a protocol violation, some SSL clients interpret this to mean any CA is acceptable. This is useful for debugging purposes.

The session parameters can printed out using the openssl-sess_id(1) command.

BUGS

Because this program has a lot of options and also because some of the techniques used are rather old, the C source for this command is rather hard to read and not a model of how things should be done. A typical SSL server program would be much simpler.

The output of common ciphers is wrong: it just gives the list of ciphers that OpenSSL recognizes and the client supports.

There should be a way for this command to print out details of any unknown cipher suites a client says it supports.

SEE ALSO

openssl(1), openssl-sess_id(1), openssl-s_client(1), openssl-ciphers(1), SSL_CONF_cmd(3), SSL_CTX_set_max_send_fragment(3), SSL_CTX_set_split_send_fragment(3), SSL_CTX_set_max_pipelines(3), ossl_store-file(7)

HISTORY

The -no_alt_chains option was added in OpenSSL 1.1.0.

The -allow-no-dhe-kex and -prioritize_chacha options were added in OpenSSL 1.1.1.

The -srpvfile, -srpuserseed, and -engine option were deprecated in OpenSSL 3.0.

The -enable_client_rpk, -enable_server_rpk, -no_rx_cert_comp, -no_tx_cert_comp, and -tfo options were added in OpenSSL 3.2.

Copyright 2000-2024 The OpenSSL Project Authors. All Rights Reserved.

Licensed under the Apache License 2.0 (the "License"). You may not use this file except in compliance with the License. You can obtain a copy in the file LICENSE in the source distribution or at https://www.openssl.org/source/license.html.